>YAMAKIN CO., LTD.

A·UNO

Direct composite resin

TMR-Z Fill 10.

Direct composite resin

TMR-AQUA BOND0

Dental Adhesive

TMR-MTA CEMENT Mielle

Dental pulp capping material

iGOS-BOND

Dental Adhesive

iGOS

Resin-based Dental Restorative Material

Multi Etchant

Etching & Cleaning

Zero Flow Etchant

Etching & Cleaning

Multi Primer

Multi Primer Series
Product Line-up

Luna-Wing

Light Cured C&B Composite Resin

TWiNY

Light and Heat Cured Indirect
Composite Resin

Nu:le Coat

Characterization material for resin Pre-treatment for PEEK

KZR-CAD Denture PC / KZR-CAD Provisional PC

Polycarbonate Disc

KZR-CAD Zr Laxio

Zirconia Blank for Dental Milling and Machining

KZR-CAD NANOZR

Technical Zirconia

KZR-CAD HR2

Hybrid Ceramics Block for CAD/CAM Use

KZR-CAD HR2 GR

Multi-Layered Hybrid Ceramics Block with Natural Gradation.

KZR-CAD HR3

Hybrid Ceramics Block for CAD/CAM Use

ZEOCELIGHT

Porcelain Fused to Metal

ZEOQUICK

Porcelain Fused to Metal

ZEO CE LIGHT ZR

Stain for characterizing Zirconia and Porcelain for zirconia frame

LEDCUREMaster

Curing apparatus for
dental technique

Company Profile Movie

YAMAKIN Company Profile Movie 2016 "Kochi Factories"

Q1.	How to use Super Opaque and Shade Opaque?
Q2.	Bubbles and cracking are found after firing opaque?
Q3.	Is bonding strength of Super Opaque affected due to differences in firing temperatures?
Q4.	Are Opaque products of other companies also affected by differences in firing temperatures?

Q1.	When VSP is used for A1 shade, red color remained a little. Can it be relieved?
Q2.	What is the difference between normal Dentine and VD?
Q3.	How should I use VD? What is the difference between VD and VSP?
Q4.	VD is produced in accordance with the general shade guide. How close is the color of VD to general shade?

Q1.	After firing, the material seems to turn yellow. Why?
Q2.	Does using a metallic spatula to mix porcelain have any effect on color after firing?
Q3.	Stain can be used for both internal layers and the outer surface, but why is the firing temperature different?
Q4.	How can I express Noritake’s Cervical CV-1 to CV-4?

Q1.	In case of collarless (margin porcelain), the margin part was shrunk after glazing.How can it be repaired?
Q2.	When using Opaque Dentine porcelain for the mucous membrane part of pontic in bridge case, the color of cervical part is different from that of the adjacent teeth, which are abutment teeth, because of the high transparency of ZEO CE LIGHT. Are there any solutions?
Q3.	Opacification was found after firing.
Q4.	When should we use ZEO CE LIGHT A0 or B0 shade?

Q1.	Is there any problem of blending ZEO CE LIGHT with modeling liquids made by other companies?
Q2.	Blended modeling liquids made by other companies with ZEO CE LIGHT, and we formed a bridge, then carried out firing; however, cracks occurred at the connection area. Why did this happen?

Q1.	Are conditions of firing different depending on types of porcelain furnace?
Q2.	Is there a difference between the indicated temperature and the inside temperature of a porcelain furnace?