>YAMAKIN CO., LTD.

ZEO CE LIGHT

Product Line-up

Basic Porcelain

●

Super Opaque 1 color/3.5g (Paste)

This improves the bonding strength to alloy and covers the metal color. Please make sure to use this product for better finishing.

●

Opaque Total: 18 colors/3.5g (Paste)

Choose shades as required for each case.

●

Separator.Margin2004 Total: 5colors/5g (Powder)

Use as Margin Porcelain. Use exclusive Margin

●

Opaque Dentine Total: 18 colors/20g, 50g, 200g (Powder)

Body powder for cervical application; it can also be used as foundation color in cases where there is not sufficient thickness for Dentine.

●

Dentine Total: 18 colors/20g, 50g, 200g (Powder)

Porcelain to express dentine

●

Dentine VD Total: 5 colors/20g, 50g, 200g (Powder)

It cases you need to modify A shade to match general shade guide, use this Dentine VD or mix Dentine VSP with Dentine.

●

Dentine VSP 1 color/20g, 50g, 200g (Powder)

Porcelain to modify Dentine A shade In the case you need to modify A shade to match general shade guide, mix Dentine VSP with Dentine

●

Enamel Total: 4 colors/20g, 50g, 200g (Powder)

Porcelain to express the enamel layer of natural teeth.

●

Opal Enamel Total: 5 colors/20g, 50g, 200g (Powder)

Reproduces the enamel layer of natural teeth. Though used in the same way as Enamel, the opalescence effect works to express the natural teeth more naturally. Amber is used by itself or mixed with Opal E1-4 to express brown color.

●

Translucent Natural 1 color/20g, 50g, 200g (Powder)

Basic translucent porcelain. Use Accent T-Clear for higher transparency, and use T-Opacity for lower transparency. T-Glass has the highest transparency.

Special Porcelainn

●

Accent Total: 24 colors/20g (Powder)

Effect porcelain for Dentine and Enamel

●

Stain Total: 18 colors/3.5g (Paste), 2g (Powder)

Can be used for both inner and surface stains. Colors may be adjusted by mixing small amounts with other porcelains.

●

Supplement Total: 3 colors/5g (Powder)

Firing temperature is set low for fixing porcelain after Glaze. Set the temperature between 790°C－830°C depending on the amount of porcelain to be used; of Porcelain D size is for Dentine, E is for Enamel, and T is for translucent. This product cannot be used after post-soldering.

●

Gum Total: 3 colors/20g (Powder)

Porcelain for gum. There are 3 colors to match clinical uses.

Accessories

Modeling Liquid 2 kinds/ 100ml, 500ml

Mixing liquid for powder porcelain.It has a little more viscosity than distillated water,delays the drying up of powders.and makes forming easier.It works to spread the color pigment equally so that an ideal color can be achieved using this liquid

Powder Opaque Liquid 2 kind/ 100ml, 500ml

Mixing Liquid for Porder Super Opaque and Powder Opaque.It has a little more viscosity than distillated water,delays the drying up puff powders,and makes forming easier.It works to spread the color pigment equally so that an ideal color can be achieved using this liquid.

Opaque Liquid 1 kind/ 10ml

Dilution liquid for Super Opaque,and Opaque.
Place desired amount on the plate for use.

Stain Liquid 1 kind/ 10ml

Dilution liquid for Stains (Paste). Place desired amount on the plate for use.

Margin Separator 1 kind/ 3.5ml

Separator exclusively developed for Margin2004.

Color Guide Total: 6 kinds (Type A-F)

A : 42 colors (Super Opaque, Opaque, Dentine, Enamel, Translucent)
B : 23 colors (Opaque, Dentine, Margin2004)
C : 6 colors (Supplement, Gum)
D : 24 colors (Accent)
E : 18 colors (Stain)
F : 11colors (Dentine VD, VSP, Opal Enamel)