Three-Point Flexural Strength(MPa) | Vickers hardness* (HV0.2) |
Radiopacity and Fluorescence |
Fluoride Sustained Release |
|
Without Water Immersion | After 7 Days of Immersion* in Water |
|||
300 ± 20 | 270 ± 20 | 90 ± 5 |
*JDMAS 245: 2017
Note: The figures given are for reference purposes and are not specifications.
GAMMATHETA can be milled with both dry- and wet-typemilling machines.
Milling time for GAMMATHETA is approx. the same as for BLOCK 2.
GAMMATHETA can be polished with an alumina polisher, but C&B DIAMOND POLISHER or C&B NANO DIAMOND POLISHER, which contain diamond particles, are recommended for smooth, quick polishing
Filler technologyWhile the average particle diameter of inorganic fillers contained in BLOCK 2 is approx. 4 μm, the |
![]() |
Surface treatmentLong-Chain Spacer Silane Coupling Agent, with outstanding water resistance, is used for the surface treatment of the inorganic fillers for GAMMATHETA. |
![]() |
YAMAKIN will respond to inquiries on the business day.
If we receive any inquiries during company holidays such as
Saturdays, Sundays, public holidays in Japan,
we will reply to you on the next day.
Business Hours: Weekday 8:45am to 17:45pm.