>YAMAKIN CO., LTD.

A·UNO

Direct composite resin

TMR-Z Fill 10.

Direct composite resin

TMR-AQUA BOND0

Dental Adhesive

TMR-MTA CEMENT Mielle

Dental pulp capping material

iGOS-BOND

Dental Adhesive

iGOS

Resin-based Dental Restorative Material

Multi Etchant

Etching & Cleaning

Zero Flow Etchant

Etching & Cleaning

Multi Primer

Multi Primer Series
Product Line-up

Luna-Wing

Light Cured C&B Composite Resin

TWiNY

Light and Heat Cured Indirect
Composite Resin

Nu:le Coat

Characterization material for resin Pre-treatment for PEEK

KZR-CAD Denture PC / KZR-CAD Provisional PC

Polycarbonate Disc

KZR-CAD Zr Laxio

Zirconia Blank for Dental Milling and Machining

KZR-CAD NANOZR

Technical Zirconia

KZR-CAD HR2

Hybrid Ceramics Block for CAD/CAM Use

KZR-CAD HR2 GR

Multi-Layered Hybrid Ceramics Block with Natural Gradation.

KZR-CAD HR3

Hybrid Ceramics Block for CAD/CAM Use

ZEOCELIGHT

Porcelain Fused to Metal

ZEOQUICK

Porcelain Fused to Metal

ZEO CE LIGHT ZR

Stain for characterizing Zirconia and Porcelain for zirconia frame

LEDCUREMaster

Curing apparatus for
dental technique

Company Profile Movie

YAMAKIN Company Profile Movie 2016 "Kochi Factories"

Q1:	Any reminder about frame works?
Q2:	What kind of metal surface treatment is recommended?

Q1:	How to use Invisible Opaque?
Q2:	What is the difference between round and flat brush?
Q3:	What is the best size of retentions beads?
Q4	Brush scrapes remain after applying Opaque. Can Opaque be softer?
Q5:	Opaque is not cured enough.
Q6:	Opaque seems to be too soft.
Q7:	How to apply Opaque uniformly without brush scrapes?

Q1:	Is it possible to mix more than 2 Stain colors?
Q2:	Is Stain capable of external staining?
Q3:	Why is Stain Clear in a liquid form?

Q1:	How to use Repair Liquid?
Q2:	What is the difference between round and flat brush?
Q3:	Luna Wing Additional Layering Work Using Repair Liquid

Q1:	Where is the Base used?
Q2:	Is it possible to use body resin other than Base remaining in a bottle for a pontic?
Q3:	How to use Opaque Dentine?
Q4:	What are the Red Plus Shades?
Q5:	How to use Effect?
Q6:	Enamel appears too white.
Q7:	Body resin seems to be too hard.
Q8:	Bubbles are observed during build up.
Q9:	Finished facing crown seems to be darker than the shade guide.
Q10:	Crack found in a connector when light cured a bridge.
Q11:	What are Luna-Wing’s handling characteristics?

Q1:	Any light curing machine can be used?
Q2:	Luna-Wing has a good hardness. Any suggestion on polishing?
Q3:	Any storage rule?
Q4:	What cases Luna-Wing is unavailable for use?