Features

Features

Pinpoint etching of enamel

Features of this product

1. Easy to operate, staying in place without dripping
2. Quickly roughens the enamel and allows for enough operation time
3. Designed not to dissolve the tooth too much while achieving improved adhesion

A case of Class Ⅲ cavity restoration
(using a YAMAKIN's bonding material and A·UNO Low Flow Normal Type)

  • 窩洞形成後

    After forming a cavity

  • ゼロフローエッチャント塗布

    Application of Zero Flow Etchant

  • 水洗・乾燥後

    After rinsing and drying

  • 治療後

    After treatment

A case of Class V cavity restoration
(using a YAMAKIN's bonding material and A·UNO Low Flow Normal Type)

  • 窩洞形成後

    After forming a cavity

  • ゼロフローエッチャント塗布

    Application of Zero Flow Etchant

  • 水洗・乾燥後

    After rinsing and drying

  • 治療後

    After treatment

Photos provided by: Takeuchi Dental Clinic (Utazu-cho, Kagawa Prefecture, Japan); Dr. Kazutaka Takeuchi

Operation Procedure Please read the instructions for use for this product and the related materials before use.


  • 1 Form a cavity

  • 2 Apply Zero Flow Etchant to enamel and leave it for at least 15 seconds.

  • 3 Rinse with water for at least 10 seconds.
    *Extend rinse time if necessary in case large amounts are applied.

  • 4 Air dry

Feature1

Easy operation suitable for selective etching

It stays in place after application without dripping, making it suitable for pinpoint etching of enamel.

Feature2

Sufficient roughening of enamel by phosphoric acid and
enough operation time

It roughens the tooth surface immediately and improves adherence property to the bonding material. Since the etching time has almost no effect on adherence property, the process can be performed with plenty of time to spare.
*Please leave to stand for at least 15 seconds after applying.

Before etching

SEM image of enamel surface

After etching (15 seconds)

Feature3

Controlled demineralization depth

Enamel dissolution is
minimized by
controlling fluidity!

Etching time: 15 seconds
Demineralization depth:
approx. 1µm

Designed to achieve the desired improvement of adherence property while minimizing the demineralization depth (amount of tooth dissolution).Even if the etching time becomes longer, over-decalcification is unlikely to occur.

Support

etchant

YAMAKIN will respond to inquiries on the business day.
If we receive any inquiries during company holidays such as
Saturdays, Sundays, public holidays in Japan,
we will reply to you on the next day.

+81-887-55-0281

Business Hours: Weekday 8:45am to 17:45pm.

access

1090-3 Kamibun, Kagami-cho, Konan-shi, Kochi 781-5451 Japan



PAGE TOP

Sitemap

YAMAKIN > Products > Zero Flow Etchant > Features

PAGE TOP