Thinly apply Repair Liquid on cured surface to improve conformation for additional build up.

Flat Brush – For wide area (Primer, Repair Liquid, Opaque, etc)
Round Brush – For detailed characterizing (Expression of hair lines, cracks lines with Stain, etc)

Repair Liquid is used for additional layering work or application.
This product is used after modifying the shape ofResin Facing Crown.（Shown fig. 1）

Fig.1 Luna Wing Repair Liquid

1. Apply Repair Liquid

Place a few drops of Repair Liquid on mixing paper (shown fig.2) and apply it as thinly as possible with a flat brush on wider area than deemed area.(Shownfig.3)
Please be noted that thick application of Repair Liquid will result in making a line after light curing. If too much liquid is accidently applied, remove the excess liquid with a Kleenex. Be careful not to leave tissues of Kleenex on the surface.

Fig.2 Repair Liquid on mixing paper

Fig.3 Apply wider area than
the additional application areaa

Fig.4 Remove excess liquid
with Kleenex

2. Additional Layering of Body Resin

(Definition: Body Resin in this instruction: Opaque Dentine, Dentine, Cervical, Effect, Enamel and Translucent) Soon after the application of Repair Liquid, apply body resin. Please remind that body resin should be applied on wider area than the pointed area. In this way, a boundary line will be invisible. (fig.5)

Fig.5 Apply wider area than pointed area

After layering additional body resin, use a flat brush to level out the surface. Level out not only the newly layered area but also the extended area in order to make a boundary line invisible. Fig.6 & 7.

Fig.6 Use a flat brush to level out
the surface of the additional layered area.

Fug.7 To make a boundary line invisible,
level out the surface on wider area.

3. Note

1. Do not apply Repair Liquid thickly.
2. Additional Body Resin should be applied wider area than deemed area.

For further information, please feel free to contact us.